agilo
Universal Press agilo
No instruction
Due to its practice-oriented construction, the agilo is suitable for practically every shape and size of workpiece within the useful working area, whereby the clamping pressure is always adapted. The precision, laser-cut grid of indexing holes cover the entire surface of the stable, one-piece work table, that is the basis for all glueing oper- ations, e.g. on frames, furniture fronts, panels, shaped parts, and boards, as well as laminations and bandings.
The rugged, one-piece, surface-honed guide rails at bottom and left do not deform, even under extremely high clamping pressures. Just a few pumping strokes are required to achieve the max. clamping pressure of 20.000 N and the max. working stroke of 65 mm. Thanks to the combination of 50 mm indexing grid and the working stroke of 65 mm, no readjustments are necessary for workpieces with similar dimensions.
The manual hydraulic unit can rotate through 360° and are particularly easy to operate. These asalo devices make it very easy to apply the correct clamping pressure. Pressure is relieved simply by finger pressure on the release lever. The piston rod returns to the zero position together with the pressure plate. An ergonomically designed handle enables the hydraulic unit to be repositioned pre-cisely and without any effort. The unit simply clicks into the indexing holes, where it is matched to the workpiece angle before being locked into position by means of a magnet.
No installation
The machine is simply unloaded, unpacked, and put in the required place, where
it is levelled out by means of the set-screws in the base. Finished. No
electrical or compressed air connections.
No servicing
The rugged table with laser-cut indexing holes is wear-free. Should one of the
manual hydraulic units fail after expiry of the guarantee period (extremely
unlikely), simply unmount it and replace it with a new unit. For this, you have
two options:
- You order a new hydraulic unit.
- You return the defective unit to us, and we will refund 50% on the purchase price of the new unit.
In both cases, shipment is within 24 hours, and according to your
instructions.
Basic set-up
4 manual hydraulic units, rotatable through 360°, 65 mm stroke, continuous
working pressure up to 20.000 N.
Technical data
Construction
Particularly stable construction. One-piece worktable with 50 mm grid of
indexing holes. No welded or bolted sections. One-piece guide rails along the
entire working (machine) width and height.
Robust, manual hydraulic units for continuous operation, with quick locking-catch and ergonomic handle. Clamping pressure up to 20.000 N. Cylinder stroke: 65 mm.
Working area
Width: 2500 mm; Height: 1500 mm;
Inlay depth: 80 mm
Overall dimensions
Width: 3100 mm; Height: 2100 mm;
Depth: 800 mm.
Machine weight
760 kg.
Surface finish
Lacquered coating with two-stage finish.
Structured lacquer
RAL 9002 grey-white,
RAL 7002 umber-grey,
RAL 3020 traffic-red,
partially with zinc plating and/or powder coating.
Features
One-piece worktable, no individual sections, therefore no offset in the indexing
hole grid. Manual hydraulic units with safety spill valve, quick-locking safety
catch, and magnetic positioning.
Guarantee
Three years.
Price
asalo universal press agilo
Working area: width 2500 mm, height 1500 mm
€ 8.740
Includes packaging, free delivery to German border or fob German seaport, and full insurance up to the installation site.
Accessories
for extensions to the initial system:
- workpiece clamp € 470
- guide rail, horizontal € 185
or vertical indexing - manual hydraulic unit € 700
Prices are subject to VAT.
We reserve the right to make changes for technical or economic development reasons.
